Produces up to33 tonsof pressure.;Bends sheet metal up to61” wide.;Maximum capacity of.078” thick sheet metalacross the machine�s full width.;3 hpmain motor requires220-volt 3-phasepower.;Runs in3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.;2 encoder-controlled hydraulic cylindersmove the top beam.;Digital readout (DRO)displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.;It takes a just few seconds tochange the top beam pressureand the top position of the stroke (for more or less travel).;You can set atimer for bend delay to hold the beam downat the bottom of the stroke, so the bend keeps its shape.;2 hand wheels let youadjust the position of the beam and back gaugefor consistency across the entire width of the beam.;Foot pedalbrings the stroke up and down, leaving your hands free to position the material.;Motorized back gaugerides on a solid ball screw trolley mechanism.;Back gauge encoder shows its position onits own DRO.;Parallel mechanism on the beamsynchronizes the top and bottom dieto deliver better quality bends across the entire width of the machine.;Heavy electrowelded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.;Rugged3,300-pound constructionsupports the hydraulic pressure, so the machine stays strong at full capacity.;Upper beam rides on ahardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.;Includes aset of hardened single-Vee American tooling.;Accepts standard press brake tooling, giving you a wide variety of options.