Accepts an11” blade.;Maximum capacity of2.75” round tubeat 90°.;Cuts thin-, medium-, or thick-walled pipe, as well as tubing, extrusions, and solid bar stock.;Miters45° rightand90° left, perfect for slotting applications.;You can switch between 2 operating speeds,60 and 120 rpm, depending on your application.;3 hpmotor requires220-volt 3-phasepower to run the direct-drive blade.;Design adds semi-automatic technology to ourCS-275M cold saw, one of the best manual production saws available.;Heavy-duty cast iron headminimizes vibrations to give you high-quality cuts with smooth edges.;Head featuresall-metal gearsthat are ground and hardened for long life.;Backlash adjustmentlets you reduce play in the gears to maintain tight tolerances throughout many years of use.;American-styleself-centering visekeeps the material in the right position to the blade for perfect cuts.;Pneumatic or air-powered visespares you the trouble of locking the material in by hand.;You can operate this circular cold saw inmanual mode(pull down the blade head by hand) orsemi-automatic mode.;Easy to use: just put your material in the vise and push the foot pedal to clamp it. The blade will automatically start, lower, and cut.;Blade will shut off and thehead automatically rises back to the toponce the cut is complete, eliminating the effort of manually returning it.;Stop rodconveniently allows you to cut repeatable lengths.;Rigid cast iron basereduces vibrations for accurate cutting and makes both the blades and the saw itself last longer.;Sturdy folded steel standstabilizes this circular saw and adds to its structural strength.;Flood coolant systemlubricates the blade for clean cutting and mirror-smooth edges.