Fluke RIGID BACKPROBE PIN SET
Item ID:
FLUTP88
Fluke RIGID BACKPROBE PIN SET
Features and Benefits:
- Slides onto test probes measuring 2mm (0.08")
- Tested to 60 V DC
- Better than a test probe alone - these 2 IN long rigid back probe pins easily pass between the weather pack seal and wire;
- A sharp point ensures good contact to the electrical connector, and the pin's insulation protects it from shorting to other wires;
- Slides onto test probes measuring 2 MM
For use with 12 V or 42 V vehicles; Ensures good contact to the electrical connector and the pins insulation protects it from shorting to other wires; Can be used with Fluke TL71 or TL75 test lead sets.Set of one red, one black 2 inch long pins slip easily onto standard test probe tip. Rated to 60 V DC. Sharp point is designed to pass between the weather pack seal and wire.
| UPC | 095969261289 |
|---|---|
| Weight | 0.050000 |
| Brand | Fluke |
| Units per package | set |
| What Tools Does It Fit | 2 MM OD Probe Tips |
| What Is the Item | RIGID BACKPROBE PIN SET |
Warranty Info:
Warranty returns may need to be processed by the manufacturer. View the manufacturer’s warranty policy for more details.Call vendor for warranty